DEAkebono
Cutting machines
Depending on the size requirements and depending on the expected performance, there are corresponding solutions which significantly enhance the cutting and banding process. The result is a much higher productivity and therefore lower production costs.
ATLAS-1200 LS
Cuts with the highest precision and bands the smallest tax marks up to sticks (maxi packs).
DETAILS
ATLAS-1200 DS (DOUBLE STACK)
Cuts and bands two stacks of strips simultaneously. For small and large cuts.
DETAILS
ATLAS-40 with maxi-pack banding
The maxi-pack banding module enables four bars to be banded simultaneously.
DETAILSPunching machines
With the ram punching method (also called high die punching), shaped labels are produced in stacks. In addition to the well proven punching solution, label materials, coatings, embossing, pre-cut precision, punching dies, etc. also contribute toward achieving a good result.
Beer, food and other labels, as well as hard plastic or cardboard products can be processed with Blumer's regular punching system. For soft plastic materials, aluminium foils and heavily embossed or large labels, punching machines with counter pressure technology are to be considered.
Because of various degrees of automation, the modular ATLAS concept offers solutions for each user, always depending on the quantities being processed.
Beer, food and other labels, as well as hard plastic or cardboard products can be processed with Blumer's regular punching system. For soft plastic materials, aluminium foils and heavily embossed or large labels, punching machines with counter pressure technology are to be considered.
Because of various degrees of automation, the modular ATLAS concept offers solutions for each user, always depending on the quantities being processed.
Counter Pressure Punching Lines
The stack, which is held in position under constant pressure, is pressed through the punching tool in a compressed state. The “pillowing” effect, which eventually takes place with regular punching systems (without counter pressure), might cause inacceptable tolerances from the top to the bottom labels within a stack. The counter-pressure method prevents this “pillowing” effect, improves the punching quality of the stacks and reduces the tolerances in a significant manner.
Counter pressure die-cutting systems are primarily used for spongy and slippery materials, as well as for large labels. This technology is mainly used for the production of in-mold labels, aluminium bottleneck foils, liquor labels, etc.
Taxstamps & cards
Maximum precision and reliability are also of most importance for security printers. Different Blumer lines, which have been used successfully for years in the label finishing process, have been adapted to the needs of security printers and card producers.
Lines
Blumer Maschinenbau AG and baumannperfecta have been working together successfully for years, to supply our demanding customers with fully automatic lines for the further processing of labels.
In the maximum automation variant, the pallet with paper sheets is placed in the line and the finished banded label stacks are taken from the ATLAS.If desired, the packing of the finished stacks can also be solved by a robot.
All new ATLAS models can be integrated into the line, so specific customer requirements can be fully and individually taken into account. Take advantage of this maximum flexibility and, together with us, bring your production to the next level of post-print optimization.
In the maximum automation variant, the pallet with paper sheets is placed in the line and the finished banded label stacks are taken from the ATLAS.If desired, the packing of the finished stacks can also be solved by a robot.
All new ATLAS models can be integrated into the line, so specific customer requirements can be fully and individually taken into account. Take advantage of this maximum flexibility and, together with us, bring your production to the next level of post-print optimization.
