Maschines

Rectangular labels

Depending on the size requirements and depending on the expected performance, there are corresponding solutions which significantly enhance the cutting and banding process. The result is a much higher productivity and therefore lower production costs.

ATLAS-1200

Cuts with the highest precision and bands the smallest tax marks up to sticks (maxi packs).
DETAILS

ATLAS-1200 Double Stream

Cuts and bands two stacks of strips simultaneously. For small and large cuts.
DETAILS

ATLAS-40

Cuts, makes intermediate cuts and bands up to four strips simultaneously.
DETAILS

Shaped labels

With the ram punching method (also called high die punching), shaped labels are produced in stacks. In addition to the well proven punching solution, label materials, coatings, embossing, pre-cut precision, punching dies, etc. also contribute toward achieving a good result.

Beer, food and other labels, as well as hard plastic or cardboard products can be processed with Blumer's regular punching system. For soft plastic materials, aluminium foils and heavily embossed or large labels, punching machines with counter pressure technology are to be considered.

Because of various degrees of automation, the modular ATLAS concept offers solution for each user, always depending on the quantities being processed.

ATLAS-1110

The plant buffers, cuts, punches and separates wet-glue labels.
DETAILS

ATLAS-1120

Combines automatic strip cutting with the punching process.
DETAILS

ATLAS-1140

A semi-automatic punching machine with automatic in-line banding.
DETAILS

D-20.M

Compact and stable die-cutting machine, developed for label and card producers.
DETAILS

Counter Pressure Punching Lines

An accurately fitted counter pressure plate, which is guided in the punching die, presses the label stack constantly down, before and during the punching process. The “pillowing” effect, which eventually takes place with regular punching systems (without counter pressure), might cause inacceptable tolerances from the top to the bottom labels within a stack. The counter-pressure method prevents this “pillowing” effect, improves the punching quality of the stacks and reduces the tolerances in a significant manner.

Counter pressure die-cutting systems are primarily used for spongy and slippery materials, as well as for large labels. This technology is mainly used for the production of in-mold labels, aluminium bottleneck foils, liquor labels, etc.

ATLAS-1110 DUAL

Powerful, accurate and fully automatic counter pressure machine for small to medium formats.
DETAILS

ATLAS-1140 DUAL

A semi-automatic counter pressure punching machine with automatic in-line banding.
DETAILS

DG-20.M

Counter pressure basic model that can be loaded manually with pre-cut stacks.
DETAILS

DG-35.M

Counter pressure die-cutting machine for medium to large format, thin and slippery labels.
DETAILS

Taxstamps & cards

Maximum precision and reliability are also of most importance for security printers. Different Blumer lines, which have been used successfully for years in the label finishing process, have been adapted to the needs of security printers and card producers.

ATLAS-1200

Cuts with the highest precision and bands the smallest tax marks up to sticks (maxi packs).
DETAILS

ATLAS-1200 Double Stream

Cuts and bands two stacks of strips simultaneously. For small and large cuts.
DETAILS

CCS-310

This machine punches out various cards from a wide range of materials, burr-free, with just one punch.
DETAILS

Lines

Blumer Maschinenbau AG and Baumann Perfecta GmbH have been working together successfully for years, to supply our demanding customers with fully automatic lines for the further processing of labels.

In the maximum automation variant, the pallet with paper sheets is placed in the line and the finished banded label stacks are taken from the ATLAS.If desired, the packing of the finished stacks can also be solved by a robot.

All new ATLAS models can be integrated into the line, so specific customer requirements can be fully and individually taken into account. Take advantage of this maximum flexibility and, together with us, bring your production to the next level of post-print optimization.

Banding Machines

Bandall

Das clevere Bandführungssystem von Bandall gibt dem Bandierbereich völlig neue Perspektiven.
DETAILS

Akebono

The machine can be supplemented with a mobile base
DETAILS

Grinding Machines

Favorit

Favorit easily sharpens punching tools made of tool steel.
DETAILS